RECOMMENDED 250-580 EXAM QUESTIONS TO PASS IN FIRST TRY

Recommended 250-580 Exam Questions To Pass In First Try

Recommended 250-580 Exam Questions To Pass In First Try

Blog Article

Tags: 250-580 Reliable Test Questions, Exam Dumps 250-580 Provider, Test Certification 250-580 Cost, 250-580 Test Simulator Online, Online 250-580 Test

250-580 study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. Many students suspect that if 250-580 learning material is really so magical? Does it really take only 20-30 hours to pass such a difficult certification exam successfully? It is no exaggeration to say that you will be able to successfully pass the exam with our 250-580 Exam Questions.

Symantec 250-580: Endpoint Security Complete - Administration R2 is an exam designed for IT professionals who want to demonstrate their skills in administering Symantec Endpoint Security Complete. 250-580 exam is a vendor-neutral certification exam and is recognized worldwide. 250-580 exam is intended to test the candidate's knowledge of Symantec Endpoint Security Complete administration, including installation, configuration, and troubleshooting.

Symantec 250-580 (Endpoint Security Complete - Administration R2) Certification Exam is designed to test the knowledge and skills of IT professionals in managing and administrating endpoint security solutions. 250-580 Exam is a globally recognized certification that sets a benchmark for IT professionals who work with Symantec endpoint security solutions. 250-580 exam covers a wide range of topics, including endpoint protection, advanced threat protection, and incident response. IT professionals who pass 250-580 exam demonstrate their expertise in managing and securing endpoints against attacks.

>> 250-580 Reliable Test Questions <<

Trustworthy 250-580 Reliable Test Questions | Easy To Study and Pass Exam at first attempt & Effective 250-580: Endpoint Security Complete - Administration R2

The beauty of life may be that we don't know what will happen in the future, but even so, we are willing to pursue a bright future. Happiness for us may be the life we want to live, and our 250-580 Study Materials can provide a good foundation for you to achieve this goal. A good job requires good skills, and the most intuitive way to measure your ability is how many qualifications you have passed and how many qualifications you have.

Symantec Endpoint Security Complete - Administration R2 Sample Questions (Q144-Q149):

NEW QUESTION # 144
What feature is used to get a comprehensive picture of infected endpoint activity?

  • A. Process View
  • B. Entity View
  • C. Endpoint Dump
  • D. Full Dump

Answer: A

Explanation:
TheProcess Viewfeature in Symantec Endpoint Detection and Response (EDR) provides a detailed and comprehensive view of activities associated with an infected endpoint. It displays a graphical representation of processes, their hierarchies, and interactions, which helps security teams understand the behavior and spread of malware on the system.
* Advantages of Process View:
* Process View shows the relationship between different processes, including parent-child structures, which can reveal how malware propagates or persists on an endpoint.
* This visualization is instrumental in tracking the full impact of an infection, helping administrators identify malicious activities linked to specific processes.
* Why Other Options Are Less Suitable:
* Entity Viewis more focused on broader data relationships, not specific infected process activities.
* Full DumpandEndpoint Dumprefer to memory or system dumps, which are useful for in-depth forensic analysis but do not provide an immediate, clear picture of endpoint activity.
References: Process View is designed within EDR for tracking endpoint infection paths and behavioral analysis.


NEW QUESTION # 145
Which client log shows that a client is downloading content from its designated source?

  • A. System Log
  • B. Risk Log
  • C. Log.LiveUpdate
  • D. SesmLu.log

Answer: C

Explanation:
TheLog.LiveUpdatelog shows details related tocontent downloadson a Symantec Endpoint Protection (SEP) client. This log captures the activities associated with updates, including:
* Content Source Information:It records the source from which the client downloads updates, whether from SEPM, a Group Update Provider (GUP), or directly from the LiveUpdate server.
* Download Progress and Status:This log helps administrators monitor successful or failed download attempts, along with version details of the downloaded content.
By reviewing the Log.LiveUpdate, administrators can verify if a client is correctly downloading content from its designated source.


NEW QUESTION # 146
The SES Intrusion Prevention System has blocked an intruder's attempt to establish an IRC connection inside the firewall. Which Advanced Firewall Protection setting should an administrator enable to prevent the intruder's system from communicating with the network after the IPS detection?

  • A. Enable denial of service detection
  • B. Block all traffic until the firewall starts and after the firewall stops
  • C. Enable port scan detection
  • D. Automatically block an attacker's IP address

Answer: D

Explanation:
To enhance security and prevent further attempts from the intruder after the Intrusion Prevention System (IPS) has detected and blocked an attack, the administrator should enable the setting toAutomatically block an attacker's IP address. Here's why this setting is critical:
* Immediate Action Against Threats: By automatically blocking the IP address of the detected attacker, the firewall can prevent any further communication attempts from that address. This helps to mitigate the risk of subsequent attacks or reconnections.
* Proactive Defense Mechanism: Enabling this feature serves as a proactive defense strategy, minimizing the chances of successful future intrusions by making it harder for the attacker to re- establish a connection to the network.
* Reduction of Administrative Overhead: Automating this response allows the security team to focus on investigating and remediating the incident rather than manually tracking and blocking malicious IP addresses, thus optimizing incident response workflows.
* Layered Security Approach: This setting complements other security measures, such as intrusion detection and port scan detection, creating a layered security approach that enhances overall network security.
Enabling automatic blocking of an attacker's IP address directly addresses the immediate risk posed by the detected intrusion and reinforces the organization's defense posture against future threats.


NEW QUESTION # 147
Which two (2) instances could cause Symantec Endpoint Protection to be unable to remediate a file? (Select two.)

  • A. There are insufficient file permissions.
  • B. Another scan is in progress.
  • C. The file has good reputation.
  • D. The file is marked for deletion by Windows on restart.
  • E. The detected file is in use.

Answer: A,E

Explanation:
Symantec Endpoint Protection (SEP) may beunable to remediate a filein certain situations. Two primary reasons for this failure are:
* The detected file is in use(Option B): When a file is actively being used by the system or an application, SEP cannot remediate or delete it until it is no longer in use. Active files are locked by the operating system, preventing modification.
* Insufficient file permissions(Option C): SEP needs adequate permissions to access and modify files. If SEP does not have the necessary permissions for the detected file, it cannot perform remediation.
Why Other Options Are Incorrect:
* Another scan in progress(Option A) does not directly prevent remediation.
* File marked for deletion on restart(Option D) would typically allow SEP to complete the deletion upon reboot.
* File with good reputation(Option E) is less likely to be flagged for remediation but would not prevent it if flagged.
References: File in-use status and insufficient permissions are common causes of remediation failure in SEP environments.


NEW QUESTION # 148
Which EDR feature is used to search for real-time indicators of compromise?

  • A. Cloud Database search
  • B. Device Group search
  • C. Endpoint search
  • D. Domain search

Answer: C

Explanation:
TheEndpoint searchfeature in Symantec Endpoint Detection and Response (EDR) is specifically used to search forreal-time indicators of compromise (IoCs)across endpoints. This feature allows administrators and security analysts to query and identify potential compromises on endpoints by looking for specific indicators such as file hashes, IP addresses, or registry keys.
* Purpose of Endpoint Search:
* Endpoint search enables a quick and focused investigation, helping identify endpoints that exhibit IoCs associated with known or suspected threats.
* This real-time search capability is essential for incident response and threat hunting.
* Why Other Options Are Incorrect:
* Domain search(Option A) is used for domain-level queries and not directly for IoCs.
* Cloud Database search(Option C) andDevice Group search(Option D) may support broader searches but do not focus on endpoint-specific, real-time IoC searches.
References: Endpoint search provides a direct and efficient method for identifying real-time IoCs across the network, essential for quick threat response.


NEW QUESTION # 149
......

PDFBraindumps's senior team of experts has developed training materials for Symantec 250-580 exam.Through PDFBraindumps's training and learning passing Symantec certification 250-580 exam will be very simple. PDFBraindumps can 100% guarantee you pass your first time to participate in the Symantec Certification 250-580 Exam successfully. And you will find that our practice questions will appear in your actual exam. When you choose our help, PDFBraindumps can not only give you the accurate and comprehensive examination materials, but also give you a year free update service.

Exam Dumps 250-580 Provider: https://www.pdfbraindumps.com/250-580_valid-braindumps.html

Report this page